Product Details

115/230V AC Twin Primary Isolation Transformers Antrim

26122 Click on the above image for a full view ...

Description: The following range of toroidal transformers are also approved to EN60742, UL506 & C22.2 No.66-1988. They have twin primary windings for either 115V or 230V operation and twin 115V secondary windings for either 115V or 230V outputs. As with toroidal mains transformers, the isolation between primary and secondary windings is rated at 4kVrms for up to 1 minute.  Note the following:  i) If the transformer is required to power US equipment from a European mains supply, please check that the equipment is suitable for a 50Hz operation. ii) The transformers are designed to produce 2 x 115V on load. These voltages will be exceeded under off load & partial load conditions. Order Part Reg Dims  Code No. Rating Typical Typ (mm)  VS59P XE7070 120VA 8.5% 90 x 51  VS60Q F7070 160VA 8% 110 x 45  VS61R G7070 225VA 7% 110 x 50  VS62S XH7070 300VA 6.5% 120 x 57  VS63T I7070 500VA 5% 137 x 60  VS64U J7070 625VA 4% 137 x 70